Is Short Cycling AC Bad?

In the HVAC industry, short cycling is used to describe an air conditioner that turns on and off too frequently. According to experts of AC installation in Port Charlotte, the short cycle relates to the time your air conditioner operates. The shorter the time, the more energy is required for the machine to restart and perform as intended.

Is Short Cycling In HVAC Good Or Bad?

  • The main issue with short cycles is that they put more strain on your air conditioner. Short cycling is undoubtedly a problem, such as a refrigerant leak. 
  • The damage short cycling does to your cooling system, is the actual issue. It reduces the system’s lifespan, necessitates more repairs, uses more energy, and makes homes less comfortable.
  • The compressor’s first startup is when air conditioners consume the most energy. Short cycling causes the compressor to start up and shut down more frequently than necessary, which wastes energy.
  • The compressor in your air conditioner develops significant wear and tear over time, leading to overheating and system burnout. Since replacing a burned-out compressor is so expensive, it is typically more sensible from an economic standpoint to replace the entire system.
  • Your living space won’t be sufficiently cooled if your cooling system shuts down the compressor before a complete cooling cycle begins. In this case, you will require air conditioning repair in Port Charlotte sooner than expected.

HVAC Short Cycling Causes

  • Overheated unit: Your device will overheat and short cycle if the air conditioner’s temperature control mechanism malfunctions. Defective or damaged heat exchangers are additional causes of overheating. In worse circumstances, a fractured heat exchanger might cause short cycling by overheating the other internal parts.
  • Ineffective thermostat: A broken thermostat is frequently to blame for short cycling. Make sure the temperature and mode settings on your thermostat are correct. Homeowners have occasionally forgotten to activate the cooling mode, which results in short cycling.
  • A filthy air filter: The airflow will be blocked if your air conditioner’s air filters are full of dirt and debris. The AC will shut off since the internal temperature will increase due to the inability of the warm air to escape. You can anticipate excessive short cycling in these situations.
  • Clogged vents: Small birds and rats frequently find their way into the vents of HVAC systems. It may result in obstruction, and the HVAC will turn off as a safety measure. Short cycling will result quickly from this requiring air conditioning repair in Port Charlotte.
  • Faulty insulation: Checking the insulation in your house is the first step. Verify for cracked seals, open windows, etc. Short cycling results from your AC’s inability to sufficiently chill your home due to poor insulation.
  • The unit size is incorrect: The distribution of conditioned air is uneven while cooling your home with a disproportionate air conditioner. Your HVAC frequently cycles on and off to regulate.
  • Servicing or repair is required: Short-cycling issues are more prevalent in homes with infrequent HVAC system maintenance. A corroded flame sensor, a condensed switch issue, or something stuck in your ducts are just a few things that can result in short cycles.
    To use our services, call Emery Air Conditioning.  Our qualified repair technicians will assess your HVAC issue and solve it as soon as possible. Contact us at 941-629-7733 for trustworthy AC installation in Port Charlotte.

We offer 24 months no interest financing.

Looking For Financing?

Think you can’t afford to replace your old unit? Of course you can.